Jedi Knight 3: Jedi Academy
# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Defeating Sand Worms
Notice that there are a lot of thermal detonators on the sand worm level "t1_danger" (merchant rescue mission). You can kill the sand creatures with them. throw them somewhere away from other objects in the map (because the Sand Worms do not go where the rocks and other things are found). With about two of the thermal detonators you can kill the Sand Worms, providing they eat them. However they do not go away permanently, even if you kill all of them. Some can still respawn. Also, if you stand still on the sand in the level, the Sand Worms will not eat you (the NPCs are programmed so that they only sense your player or anything else when it moves).
Defeating Wampas
To kill a Wampa quickly, let it grab you. As you are hanging upside down, swing your lightsaber to cut off its arm and kill it instantly.
Easy defeat of Allora
When you are on Hoth at the room before you get to Allora, you will see a Wampa attacking a Tauntaun. Save the Tauntaun from dying and ride it into the room with Allora. When the battle starts, immediately ram the Tauntaun into Allora (by right clicking). It will be an instant kill.
Fighting friendly characters
Enable the playerteam enemy code in the console, then spawn kyle or jedi_random to fight them.
Dismember people
Here is how to dismember people in JK3, just like in JK2. This involves editing a game files ! But it works.
1: Go into the Game folder. 2: Find the GameData folder. 3: Find the base folder. 4: Find jaconfig.cfg (if it is not there, make sure that the window is set to show ALL FILES) 5: Find g_saberMoreRealistic "0" and change it to g_saberMoreRealistic "99" 6: Find cg_saber EntMarks "1" and change it to cg_saberEntMarks "99" 7: Find g_dismemberment "0" or "1" and change it to g_dismemberment "99" 8: Save it.
Defeating Reborns
Activate Force Speed (works best with grade 3 speed) and slash once at their front to lure them down. Then, run around behind them and slash their back as many times as possible. This works best if you push them in a corner and complete the procedure.
Use the following trick to kill Reborns, Reborn Masters, Jedi, and other Force users. Use Force Grip to hold them in the air, then throw your lightsaber at them to kill them. It is harder to do to some, but if you timed correctly you will hit them. This usually works best with Grip level 3 and Saber Throw level 3, but is still possible to do with the other levels.
When fighting the Reborns at the start of Chandrilla (after the bridge is blown up), lure them all to the bridge then jump over to the other side. Two of the Reborns will attempt to jump over as well, but will fall to their doom.
All Cheats
To enable cheats, while playing a game, bring down the console with [Shift + ~] and type "devmapall" or "helpusobi 1". You can then enter any of the following codes in the console:
Effect - Code
All weapons and items - give all Dead mode on - undying Extra ammunition - give ammo Extra armor - give armor Extra health - give health God mode - god No clipping - noclip Quit game - quit Fight with fists - iknowkungfu Show shaders - shaderlist Suicide - kill Set all Forces to indicated value - setforceall <1-4> Kill all NPCs - npckillall Invisiblity - notarget Load map with cheats enabled - devmap Spawn indicated NPC - npc spawn Freeze all NPCs - d_npc freeze 1 Unfreeze all NPCs - d_npcfreeze 0 Set saber color ** - sabercolor <1-2>
Set all lightsaber abilities - setsaberall <1-10> Record demo with indicated name - record Stop demo recording - stoprecord Enable dismemberment * - g_saberrealisticcombat <1-20> Freeze game for indicated time - freeze Spawn indicated item - give Perform taunt *** - taunt Display indicated message in console, or on main screen if bound - echo Toggle any variable/command that uses a 1 or 0 (1=on,0=off) - toggle
Notes:
* - Turn dismemberment on at the options menu after enabling this code.
** - Each blade (saber staff or dual sabers) can be changed individually. 1 is the top blade of the saber staff, or the right-hand saber (dual sabers). 2 is the other blade. This color will "disappear", but will return, when you are using a one bladed saber. For example, to set a saber staff to have the upper blade green and bottom blade yellow, enter the code sabercolor 1 green, followed by sabercolor 2 yellow.
*** - If using dual sabers, he/she will make an "X" with the sabers. If using a saber staff, he/she will make a half circle on the ground and a "come here" gesture. If only one saber (one blade) is on, they will do the standard spinning taunt.
More cheats:
Set lightsaber throw level - setsaberthrow <1-3> Set lightsaber offense level - setsaberoffense <1-3> Set lightsaber defense level - setsaberdefense <1-3> Set Force Jump level - setforcejump <1-3> Set Force Heal level - setforceheal <1-3> Set Force Push level - setforcepush <1-3> Set Force Pull level - setforcepull <1-3> Set Force Speed level - setforcespeed <1-3> Set Force Grip level - setforcegrip <1-3> Set Force Lightning level - setforcelightning <1-3> Level skip - victory Use Force Heal - force_heal Bullet time - thereisnospoon Pit level - map pit Change speed; 1 is default, .5 is half speed - timescale Pick up dropped lightsabers - g_saberpickupabledroppedsabers <1-0> Single lightsaber with desired hilt - saber single_<1-9> Dual lightsabers with desired hilt - saber single_<1-9> single_<1-9> Double lightsaber with desired hilt - saber dual_<1-5> Sith sword saber - sith_sword Turn off HUD and save screenshot - levelshot Save screenshot - screenshot Centers the view on the screen - centerview Change difficulty level after quicksave/quickload or starting a new mission (if done out of the level) - g_spskill Fly an X-Wing - fly_xwing Ride an ATST - drive_atst Unknown - where Unknown - levelshot Unknown - spawn Unknown - altbind Unknown - altbindlist Unknown - systeminfo Unknown - gfxinfo Unknown - playsong Unknown - widgetcom Unknown - inventory Unknown - vstr Unknown - heartbeat Unknown - kick Unknown - tiki Unknown - rcon Unknown - flushlips Unknown - meminfo Unknown - reset Unknown - demo Unknown - alisdump Unknown - skinlist Unknown - mand Unknown - setviewpos
Changing saber colors: When using the sabercolor <1-2> code, the following values can be used for and .
green red blue yellow purple orange sabercolor 1 will make the right-hand saber (for dual sabers) . sabercolor 2 will make the left hand saber (for dual sabers) . sabercolor 1 will make the top part of the saber staff and the bottom part . For example, to have a saber staff (two handed saber) green, use the sabercolor 1 green green code.
Dropped lightsabers: Enable the g_saberpickupabledroppedsabers 1 code to enable the pick up of dropped lightsabers. After a Jedi or Sith dies, you can walk up to his/her lightsaber on the floor. You will see a "Use" icon (hand with a finger on a button). Use it, and you will drop your current lightsaber and pick up his or hers. Note: If you have a saberstaff, you will drop your staff and pick up the saber, giving you a total of one saber. If you have one saber, you will pick up his saber which gives you a total of two sabers. If you have two sabers, you will drop the one in your left hand and replace it with his. If you have no saber (none in your weapons/inventory), you will pick up and end up with only one saber (until you pick up another one). If you have any type of saber (one, dual or staff), and you pick up a saber staff, you will drop any/all your sabers and pick up his.
Difficulty settings: Use one of the following entries with the g_spskill code. Information in this section was contributed by Defender.
0: Padawan 1: Jedi 2: Jedi Knight 3: Jedi Master Values higher than 3 will progressively increase the difficulty setting.
NPC names: Use one of the following entries with the npc spawn code.
chewie cultist (gun) cultist_destroyer cultist_drain cultist_grip cultist_lightning (untextured model) cultist_saber cultist_saber_all cultist_saber_med cultist_saber_strong cultist_saber_strong_throw cultist_saber_strong_throw2 cultist_saber_throw cultistcommando gran gran2 granboxer granshooter human_merc jawa jedi_random (various helpers from the Academy) kyle kyle_boss luke (untextured and no saber) protocol (C3PO) r2d2 r5d2 r5d2_imp reborn_dual reborn_new reborn_new2 reborn_staff rodian rodian2 trandoshan (different colors possible) weequay weequay2 weequay3 weequay4 (different colors possible)